	*************************************************
	*                                               *
	*          ONE-View report generation           *
	*                                               *
	*************************************************

[MAQAO] Info: Experiment configuration summary is available adding -dbg=1 in command line

* [MAQAO] Warning: Experiment directory /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/run/oneview_runs/compilers/gcc_1/oneview_results_1785340487 already exists and is reused.
           It can be replaced using --replace in the command line.
[MAQAO] Info: 
[MAQAO] Info: START THE APPLICATION PROFILING
[MAQAO] Info: -> RUNNING THE PROFILER...
[MAQAO] Info:   LPROF has already been run
[MAQAO] Info: STOP THE APPLICATION PROFILING
[MAQAO] Info: 
[MAQAO] Info: START FUNCTIONS AND LOOPS ANALYSIS ...
[MAQAO] Info: STOP FUNCTIONS AND LOOPS ANALYSIS ...
[MAQAO] Info: 
[MAQAO] Info: START THE REPORT GENERATION
[MAQAO] Info: -> ONE-VIEW EXPERIMENT DIRECTORY: /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/run/oneview_runs/compilers/gcc_1/oneview_results_1785340487


+===================================================================================================================+
+                                                   1  -  GLOBAL                                                    +
+===================================================================================================================+


+-------------------------------------------------------------------------------------------------------------------+
+                                            1.1  -  Experiment Summary                                             +
+-------------------------------------------------------------------------------------------------------------------+

  Application:			/home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/run/binaries/gcc_1/exec
  Timestamp:			2026-07-29 15:54:47
  Universal Timestamp:		1785340487
  Experiment Type:		MPI; OpenMP; Throughput; 
  Machine:			ip-172-31-9-132.ec2.internal
  Architecture:			aarch64
  Micro Architecture:		ARM_NEOVERSE_V2
  OS Version:			Linux 6.1.170-213.321.amzn2023.aarch64 #1 SMP Thu May 14 12:18:13 UTC 2026
  Compilation Options:		
		exec: GNU C++17 14.2.1 20250110 (Red Hat 14.2.1-7) -mcpu=neoverse-v2 -mlittle-endian -mabi=lp64 -g -O3 -O3 -O3 -std=c++17 -funroll-loops -ffast-math -fno-omit-frame-pointer -fPIC -fopenmp 
  Number of processes observed:	1
  Number of threads observed:	96
  MAQAO version:		2026.0.1
  MAQAO build:			Build information not available




+-------------------------------------------------------------------------------------------------------------------+
+                                              1.2  -  Global Metrics                                               +
+-------------------------------------------------------------------------------------------------------------------+

  Total Time:				42.64 s
  Max (Thread Active Time):		42.50 s
  Average Active Time:			38.13 s
  Activity Ratio:			89.5 %
  Average number of active threads:	85.844
  Affinity Stability:			96.0 %
  Time spent in analyzed loops:		99.6 %
  Time spent in analyzed innermost loops: 13.0 %
  Time spent in user code:		99.6 %
  Compilation Options Score:		100
  Array Access Efficiency:		75.5 %

   Potential Speedups
  ----------------------------------------------------
  Perfect Flow Complexity:		1.00
  Perfect OpenMP/MPI/Pthread/TBB:	1.00
  Perfect OpenMP/MPI/Pthread/TBB + Load Distribution:	1.12
  If No Scalar Integer:
      Potential Speedup:		1.65
      Nb Loops to get 80%:		1
  If FP Vectorized:
      Potential Speedup:		1.05
      Nb Loops to get 80%:		1
  If Fully Vectorized:
      Potential Speedup:		1.25
      Nb Loops to get 80%:		1
  If Only FP Arithmetic:
      Potential Speedup:		4.07
      Nb Loops to get 80%:		2




+-------------------------------------------------------------------------------------------------------------------+
+                                            1.3  -  Potential Speedups                                             +
+-------------------------------------------------------------------------------------------------------------------+

  If No Scalar Integer:
      Number of loops   | 1      | 2      | 4      | 5      | 8      | 
      Cumulated Speedup | 1.6303 | 1.6418 | 1.6532 | 1.6534 | 1.6534 | 
  Top 5 loops:
    exec - 2113:	1.6303
    exec - 2348:	1.6418
    exec - 2354:	1.653
    exec - 2353:	1.6532
    exec - 2114:	1.6534

  If FP Vectorized:
      Number of loops   | 1      | 2      | 4      | 5      | 8      | 
      Cumulated Speedup | 1.0426 | 1.0467 | 1.0507 | 1.0507 | 1.0507 | 
  Top 5 loops:
    exec - 2113:	1.0426
    exec - 2348:	1.0467
    exec - 2354:	1.0506
    exec - 2353:	1.0507
    exec - 1854:	1.0507

  If Fully Vectorized:
      Number of loops   | 1      | 2      | 4      | 5      | 8      | 
      Cumulated Speedup | 1.2368 | 1.2425 | 1.2483 | 1.2485 | 1.2485 | 
  Top 5 loops:
    exec - 2113:	1.2368
    exec - 2348:	1.2425
    exec - 2354:	1.2481
    exec - 2114:	1.2483
    exec - 2353:	1.2485

  If Only FP Arithmetic:
      Number of loops   | 1      | 2      | 4      | 5      | 8      | 
      Cumulated Speedup | 3.0284 | 3.4958 | 4.0704 | 4.0704 | 4.0704 | 
  Top 5 loops:
    exec - 2113:	3.0284
    exec - 1854:	3.4958
    exec - 1742:	4.0672
    exec - 2114:	4.0704
    exec - 1975:	4.0704



+===================================================================================================================+
+                                                   2  -  SUMMARY                                                   +
+===================================================================================================================+


+-------------------------------------------------------------------------------------------------------------------+
+                                            2.1  -  EXPERIMENT QUALITY                                             +
+-------------------------------------------------------------------------------------------------------------------+

  [4 / 4] Application profile is long enough (42.50 s)
To have good quality measurements, it is advised that the application profiling time is greater than 10 seconds.

  [3 / 3] Most of time spent in analyzed modules comes from functions with source/debug info
-g option gives access to debugging informations, such are source locations.

  [2.9999547502606 / 3] Most of time spent in analyzed modules (100.00%) comes from functions compiled with architecture specialization
option -mcpu


  [3 / 3] Most of time spent in analyzed modules comes from functions with compilation options informations and
-fno-omit-frame-pointer is present
-fno-omit-frame-pointer improves the accuracy of callchains found during the application profiling.

  [3 / 3] Optimization level option is correctly used


  [3 / 3] Host configuration allows retrieval of all necessary metrics.


  [2 / 2] Application is correctly profiled ("Others" category represents 0.00 % of the execution time)
To have a representative profiling, it is advised that the category "Others" represents less than 20% of the
execution time in order to analyze as much as possible of the user code

  [1 / 1] Lstopo present. The Topology lstopo report will be generated.



+-------------------------------------------------------------------------------------------------------------------+
+                                               2.2  -  CODE QUALITY                                                +
+-------------------------------------------------------------------------------------------------------------------+

  [4 / 4] Enough time of the experiment time spent in analyzed loops (99.61%)
If the time spent in analyzed loops is less than 30%, standard loop optimizations will have a limited impact on
application performances.

  [3 / 4] A significant amount of threads are idle (10.58%)
On average, more than 10% of observed threads are idle. Such threads are probably IO/sync waiting. Some hints: use
faster filesystems to read/write data, improve parallel load balancing and/or scheduling.

  [3 / 4] CPU activity is below 90% (89.47%)
CPU cores are idle more than 10% of time. Threads supposed to run on these cores are probably IO/sync waiting. Some
hints: use faster filesystems to read/write data, improve parallel load balancing and/or scheduling.

  [4 / 4] Loop profile is not flat
At least one loop coverage is greater than 4% (86.58%), representing an hotspot for the application

  [0 / 4] Too little time of the experiment time spent in analyzed innermost loops (12.98%)
If the time spent in analyzed innermost loops is less than 15%, standard innermost loop optimizations such as
vectorisation will have a limited impact on application performances.

  [4 / 4] Affinity is good (96.03%)
Threads are not migrating to CPU cores: probably successfully pinned

  [3 / 3] Less than 10% (0.00%) is spend in BLAS1 operations
It could be more efficient to inline by hand BLAS1 operations

  [0 / 3] Too many functions do not use all threads
Functions running on a reduced number of threads (typically sequential code) cover at least 10% of application
walltime (10.24%). Check both "Max Inclusive Time Over Threads" and "Nb Threads" in Functions or Loops tabs and
consider parallelizing sequential regions or improving parallelization of regions running on a reduced number of
threads

  [0 / 3] Cumulative Outermost/In between loops coverage (86.63%) greater than cumulative innermost loop coverage (12.98%)
Having cumulative Outermost/In between loops coverage greater than cumulative innermost loop coverage will make loop
optimization more complex

  [2 / 2] Less than 10% (0.00%) is spend in BLAS2 operations
BLAS2 calls usually could make a poor cache usage and could benefit from inlining.

  [2 / 2] Less than 10% (0.00%) is spend in Libm/SVML (special functions)



+-------------------------------------------------------------------------------------------------------------------+
+                                              2.3  -  LOOPS OVERVIEW                                               +
+-------------------------------------------------------------------------------------------------------------------+

  Top 5 loops:
   + exec - 2113:
     analysis: Execution Time: 86 % - Vectorization Ratio: 5.88 % - Vector Length Use: 52.08 %
     Loop Computation Issues: 2
        [2] [SA] Presence of a large number of scalar integer instructions - Simplify loop structure, perform loop
            splitting or perform unroll and jam. This issue costs 2 points.
     Control Flow Issues: 40
        [38] [SA] Too many paths (34 paths) - Simplify control structure. There are 34 issues ( = paths) costing 1
            point each with a malus of 4 points.
        [2] [SA] Non innermost loop (InBetween) - Collapse loop with innermost ones. This issue costs 2 points.
     Vectorization Roadblocks: 40
        [38] [SA] Too many paths (34 paths) - Simplify control structure. There are 34 issues ( = paths) costing 1
            point each with a malus of 4 points.
        [2] [SA] Non innermost loop (InBetween) - Collapse loop with innermost ones. This issue costs 2 points.

   + exec - 1854:
     analysis: Execution Time: 5 % - Vectorization Ratio: 100.00 % - Vector Length Use: 100.00 %
     Data Access Issues: 4
        [4] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 2 issues ( = data accesses) costing 2
            point each.
     Vectorization Roadblocks: 4
        [4] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 2 issues ( = data accesses) costing 2
            point each.

   + exec - 1742:
     analysis: Execution Time: 5 % - Vectorization Ratio: 100.00 % - Vector Length Use: 100.00 %
     Data Access Issues: 4
        [4] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 2 issues ( = data accesses) costing 2
            point each.
     Vectorization Roadblocks: 4
        [4] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 2 issues ( = data accesses) costing 2
            point each.

   + exec - 2348:
     analysis: Execution Time: 0 % - Vectorization Ratio: 0.00 % - Vector Length Use: 50.00 %
     Loop Computation Issues: 18
        [16] [SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper
            numerical library or perform value profiling (count the number of distinct input values). There are 4
            issues (= instructions) costing 4 points each.
        [2] [SA] Presence of a large number of scalar integer instructions - Simplify loop structure, perform loop
            splitting or perform unroll and jam. This issue costs 2 points.
     Data Access Issues: 12
        [12] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 6 issues ( = data accesses) costing 2
            point each.
     Vectorization Roadblocks: 12
        [12] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 6 issues ( = data accesses) costing 2
            point each.

   + exec - 2354:
     analysis: Execution Time: 0 % - Vectorization Ratio: 0.00 % - Vector Length Use: 50.00 %
     Loop Computation Issues: 34
        [32] [SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper
            numerical library or perform value profiling (count the number of distinct input values). There are 8
            issues (= instructions) costing 4 points each.
        [2] [SA] Presence of a large number of scalar integer instructions - Simplify loop structure, perform loop
            splitting or perform unroll and jam. This issue costs 2 points.
     Data Access Issues: 12
        [12] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 6 issues ( = data accesses) costing 2
            point each.
     Vectorization Roadblocks: 12
        [12] [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange
            or use gather instructions to lower a bit the cost. There are 6 issues ( = data accesses) costing 2
            point each.



+===================================================================================================================+
+                                                 3  -  APPLICATION                                                 +
+===================================================================================================================+


+-------------------------------------------------------------------------------------------------------------------+
+                                              3.1  -  Categorization                                               +
+-------------------------------------------------------------------------------------------------------------------+

   Category | IO     | Exe    | System  | Others | Memory | String | MPI   | TBB   | OMP   | Pthread | Math  |
  ----------+--------+--------+---------+--------+--------+--------+-------+-------+-------+---------+-------+
   Time (%) | 0.00   | 99.61  | 0.09    | 0.00   | 0.00   | 0.04   | 0.00  | 0.00  | 0.26  | 0.00    | 0.00  |




+-------------------------------------------------------------------------------------------------------------------+
+                                         3.2  -  Function Based Profiling                                          +
+-------------------------------------------------------------------------------------------------------------------+

   Buckets                   | Nb Functions              | Coverage                  | Cumulated Coverage        |
  ---------------------------+---------------------------+---------------------------+---------------------------+
   > 8%                      | 1                         | 86.61                     | 86.61                     |
   4% to 8%                  | 2                         | 11.25                     | 97.86                     |
   2% to 4%                  | 0                         | 0.00                      | 97.86                     |
   1% to 2%                  | 1                         | 1.49                      | 99.35                     |
   0.5% to 1%                | 0                         | 0.00                      | 99.35                     |
   0.25% to 0.5%             | 1                         | 0.26                      | 99.61                     |
   0.125% to 0.25%           | 1                         | 0.22                      | 99.83                     |
   < 0.125%                  | 93                        | 0.17                      | 100.00                    |




+-------------------------------------------------------------------------------------------------------------------+
+                                           3.3  -  Loop Based Profiling                                            +
+-------------------------------------------------------------------------------------------------------------------+

   Buckets                   | Nb Loops                  | Coverage                  | Cumulated Coverage        |
  ---------------------------+---------------------------+---------------------------+---------------------------+
   > 8%                      | 0                         | 0.00                      | 0.00                      |
   4% to 8%                  | 2                         | 11.25                     | 11.25                     |
   2% to 4%                  | 0                         | 0.00                      | 11.25                     |
   1% to 2%                  | 0                         | 0.00                      | 11.25                     |
   0.5% to 1%                | 2                         | 1.47                      | 12.72                     |
   0.25% to 0.5%             | 1                         | 0.26                      | 12.98                     |
   0.125% to 0.25%           | 0                         | 0.00                      | 12.98                     |
   < 0.125%                  | 2                         | 0.00                      | 12.98                     |


+===================================================================================================================+
+                                                  4  -  FUNCTIONS                                                  +
+===================================================================================================================+


+-------------------------------------------------------------------------------------------------------------------+
+                                             4.1  -  Top 10 Functions                                              +
+-------------------------------------------------------------------------------------------------------------------+

   Function                                               | Module               | Coverage (%)  | Time (s)      |
  --------------------------------------------------------+----------------------+---------------+---------------+
   std::enable_if<camp::concepts::all_of<camp::concept... | exec                 | 86.61         | 33.03         |
   std::enable_if<camp::concepts::all_of<camp::concept... | exec                 | 5.89          | 2.25          |
   std::enable_if<camp::concepts::all_of<camp::concept... | exec                 | 5.36          | 2.04          |
   std::enable_if<camp::concepts::all_of<camp::concept... | exec                 | 1.49          | 0.57          |
   std::enable_if<camp::concepts::all_of<camp::concept... | exec                 | 0.26          | 0.10          |
   omp_get_num_procs                                      | libgomp.so.1.0.0     | 0.22          | 0.08          |
   __memset                                               | libastring.so        | 0.04          | 1.40          |
   omp_test_nest_lock                                     | libgomp.so.1.0.0     | 0.03          | 0.01          |
   __pi_clear_page                                        | kernel               | 0.02          | 0.59          |
   queued_spin_lock_slowpath                              | kernel               | 0.01          | 0.01          |


+===================================================================================================================+
+                                                    5  -  LOOPS                                                    +
+===================================================================================================================+


+-------------------------------------------------------------------------------------------------------------------+
+                                               5.1  -  Top 10 Loops                                                +
+-------------------------------------------------------------------------------------------------------------------+

   Loop Id        | Module               | Source Location                                       | Coverage (%)  |
  ----------------+----------------------+-------------------------------------------------------+---------------+
   2113           | exec                 | IndexValue.hpp:109-109,TypedViewBase.hpp:216-216,L... | 86.58         |
   1854           | exec                 | Operators.hpp:366-366,LTimes.cpp:62-62,For.hpp:142... | 5.89          |
   1742           | exec                 | Operators.hpp:366-366,LPlusTimes.cpp:57-57,For.hpp... | 5.36          |
   2348           | exec                 | SweepSubdomain.cpp:88-106,For.hpp:142-142             | 0.75          |
   2354           | exec                 | SweepSubdomain.cpp:88-106,For.hpp:142-142             | 0.72          |
   1975           | exec                 | Operators.hpp:369-369,Population.cpp:58-58,For.hpp... | 0.26          |
   2114           | exec                 | TypedViewBase.hpp:216-216,Scattering.cpp:85-85,For... | 0.03          |
   2353           | exec                 | SweepSubdomain.cpp:88-90,SweepSubdomain.cpp:95-101... | 0.02          |
   1855           | exec                 | LTimes.cpp:62-62,TypedViewBase.hpp:216-216,For.hpp... | 0.00          |
   2262           | exec                 | Operators.hpp:369-369,Collapse.hpp:129-129,Iterato... | 0.00          |





+===================================================================================================================+
+                                                     6  -  CQA                                                     +
+===================================================================================================================+


+-------------------------------------------------------------------------------------------------------------------+
+                                                   6.1  -  Loops                                                   +
+-------------------------------------------------------------------------------------------------------------------+





      6.1.1  -  Loop 2113 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Operators.hpp:369
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/index/IndexValue.hpp:109
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/TypedViewBase.hpp:216
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Layout.hpp:187
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/Scattering.cpp:87-97
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


Warnings:
 - Non-innermost loop: analyzing only self part (ignoring child loops).
 - Ignoring paths for analysis
 - Too many paths. If you really need to analyze all of the 34 paths individually, rerun with max-paths=34
 - RecMII not computed since number of paths is unknown or > max_paths
 - Streams not analyzed since number of paths is unknown or > max_paths

Try to simplify control and/or increase the maximum number of paths per function/loop through the 'max-paths-nb' option.

This loop has 34 execution paths.

The presence of multiple execution paths is typically the main/first bottleneck.
Try to simplify control inside loop: ideally, try to remove all conditional expressions, for example by (if applicable):
 - hoisting them (moving them outside the loop)
 - turning them into conditional moves, MIN or MAX


Ex: if (x<0) x=0 => x = (x<0 ? 0 : x) (or MAX(0,x) after defining the corresponding macro)


      6.1.1.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

5% of peak computational performance is used (1.81 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.1.1.1  -  Code clean check
  ---------------------------------------------------------------------------------------------------------

Detected a slowdown caused by scalar integer instructions (typically used for address computation).
By removing them, you can lower the cost of an iteration from 13.25 to 7.33 cycles (1.81x speedup).

Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.1.1.2  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is not vectorized.
Only 52% of vector register length is used (average across all VPU instructions).
By fully vectorizing your loop, you can lower the cost of an iteration from 13.25 to 10.32 cycles (1.28x speedup).

Details
5% of VPU instructions are used in vector version (process two or more data elements in vector registers):
 - 0% of VPU loads are used in vector version.
 - 0% of VPU stores are used in vector version.
 - 66% of VPU addition or subtraction instructions are used in vector version.
 - 0% of VPU fused multiply-add instructions are used in vector version.
 - 6% of VPU instructions that are not load, store, addition, subtraction nor multiply instructions are used in vector version.
Since your execution units are vector units, only a fully vectorized loop can use their full power.


Workaround
 - Try another compiler or update/tune your current one
 - Remove inter-iterations dependences from your loop and make it unit-stride:
  * If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly:
C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)<<image_row_maj>>
  * If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA):
for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)





      6.1.1.1.3  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 10 FMA (fused multiply-add) operations.




      6.1.1.1.4  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 24 FP arithmetical operations:
 - 14: addition or subtraction (10 inside FMA instructions)
 - 10: multiply (all inside FMA instructions)
The binary loop is loading 3 bytes.


      6.1.1.1.5  -  Arithmetic intensity
  ---------------------------------------------------------------------------------------------------------

Arithmetic intensity is 8.00 FP operations per loaded or stored byte.







      6.1.2  -  Loop 1854 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Operators.hpp:366
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/LTimes.cpp:62
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


The related source loop is unrolled by 2 (including vectorization).

      6.1.2.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

12% of peak computational performance is used (4.00 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.2.1.1  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is fully vectorized, using full register length.


Details
All VPU instructions are used in vector version (process two or more data elements in vector registers).





      6.1.2.1.2  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 16 FMA (fused multiply-add) operations.




      6.1.2.1.3  -  Slow data structures access
  ---------------------------------------------------------------------------------------------------------

Detected data structures (typically arrays) that cannot be efficiently read/written

Details
 - Constant non-unit stride: 2 occurrence(s)
Non-unit stride (uncontiguous) accesses are not efficiently using data caches


Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.2.1.4  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 32 FP arithmetical operations:
 - 16: addition or subtraction (all inside FMA instructions)
 - 16: multiply (all inside FMA instructions)
The binary loop does not load or store any data.







      6.1.3  -  Loop 1742 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Operators.hpp:366
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/LPlusTimes.cpp:57
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


The related source loop is unrolled by 2 (including vectorization).

      6.1.3.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

12% of peak computational performance is used (4.00 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.3.1.1  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is fully vectorized, using full register length.


Details
All VPU instructions are used in vector version (process two or more data elements in vector registers).





      6.1.3.1.2  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 16 FMA (fused multiply-add) operations.




      6.1.3.1.3  -  Slow data structures access
  ---------------------------------------------------------------------------------------------------------

Detected data structures (typically arrays) that cannot be efficiently read/written

Details
 - Constant non-unit stride: 2 occurrence(s)
Non-unit stride (uncontiguous) accesses are not efficiently using data caches


Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.3.1.4  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 32 FP arithmetical operations:
 - 16: addition or subtraction (all inside FMA instructions)
 - 16: multiply (all inside FMA instructions)
The binary loop does not load or store any data.







      6.1.4  -  Loop 2348 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/SweepSubdomain.cpp:88-106
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


The related source loop is multi-versionned.

      6.1.4.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

4% of peak computational performance is used (1.57 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.4.1.1  -  Code clean check
  ---------------------------------------------------------------------------------------------------------

Detected a slowdown caused by scalar integer instructions (typically used for address computation).
By removing them, you can lower the cost of an iteration from 13.99 to 6.00 cycles (2.33x speedup).

Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.4.1.2  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is not vectorized.
2 data elements could be processed at once in vector registers.
By vectorizing your loop, you can lower the cost of an iteration from 13.99 to 6.99 cycles (2.00x speedup).

Details
All VPU instructions are used in scalar version (process only one data element in vector registers).
Since your execution units are vector units, only a vectorized loop can use their full power.


Workaround
 - Try another compiler or update/tune your current one
 - Remove inter-iterations dependences from your loop and make it unit-stride:
  * If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly:
C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)<<image_row_maj>>
  * If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA):
for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)





      6.1.4.1.3  -  Expensive FP math instructions/calls
  ---------------------------------------------------------------------------------------------------------

Detected performance impact from expensive FP math instructions/calls.
By removing/reexpressing them, you can lower the cost of an iteration from 13.99 to 6.00 cycles (2.33x speedup).


      6.1.4.1.4  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 5 FMA (fused multiply-add) operations.
Presence of both ADD/SUB and MUL operations.

Workaround
Try to change order in which elements are evaluated (using parentheses) in arithmetic expressions containing both ADD/SUB and MUL operations to enable your compiler to generate FMA instructions wherever possible.
For instance a + b*c is a valid FMA (MUL then ADD).
However (a+b)* c cannot be translated into an FMA (ADD then MUL).




      6.1.4.1.5  -  Slow data structures access
  ---------------------------------------------------------------------------------------------------------

Detected data structures (typically arrays) that cannot be efficiently read/written

Details
 - Constant unknown stride: 6 occurrence(s)
Non-unit stride (uncontiguous) accesses are not efficiently using data caches


Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.4.1.6  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 22 FP arithmetical operations:
 - 12: addition or subtraction (5 inside FMA instructions)
 - 6: multiply (5 inside FMA instructions)
 - 4: divide
The binary loop does not load or store any data.







      6.1.5  -  Loop 2354 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/SweepSubdomain.cpp:88-106
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


The related source loop is multi-versionned.

      6.1.5.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

4% of peak computational performance is used (1.57 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.5.1.1  -  Code clean check
  ---------------------------------------------------------------------------------------------------------

Detected a slowdown caused by scalar integer instructions (typically used for address computation).
By removing them, you can lower the cost of an iteration from 27.97 to 12.00 cycles (2.33x speedup).

Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.5.1.2  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is not vectorized.
2 data elements could be processed at once in vector registers.
By vectorizing your loop, you can lower the cost of an iteration from 27.97 to 13.99 cycles (2.00x speedup).

Details
All VPU instructions are used in scalar version (process only one data element in vector registers).
Since your execution units are vector units, only a vectorized loop can use their full power.


Workaround
 - Try another compiler or update/tune your current one
 - Remove inter-iterations dependences from your loop and make it unit-stride:
  * If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly:
C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)<<image_row_maj>>
  * If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA):
for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)





      6.1.5.1.3  -  Expensive FP math instructions/calls
  ---------------------------------------------------------------------------------------------------------

Detected performance impact from expensive FP math instructions/calls.
By removing/reexpressing them, you can lower the cost of an iteration from 27.97 to 12.00 cycles (2.33x speedup).


      6.1.5.1.4  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 10 FMA (fused multiply-add) operations.
Presence of both ADD/SUB and MUL operations.

Workaround
Try to change order in which elements are evaluated (using parentheses) in arithmetic expressions containing both ADD/SUB and MUL operations to enable your compiler to generate FMA instructions wherever possible.
For instance a + b*c is a valid FMA (MUL then ADD).
However (a+b)* c cannot be translated into an FMA (ADD then MUL).




      6.1.5.1.5  -  Slow data structures access
  ---------------------------------------------------------------------------------------------------------

Detected data structures (typically arrays) that cannot be efficiently read/written

Details
 - Constant non-unit stride: 6 occurrence(s)
Non-unit stride (uncontiguous) accesses are not efficiently using data caches


Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.5.1.6  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 44 FP arithmetical operations:
 - 24: addition or subtraction (10 inside FMA instructions)
 - 12: multiply (10 inside FMA instructions)
 - 8: divide
The binary loop does not load or store any data.







      6.1.6  -  Loop 1975 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Operators.hpp:369
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/Population.cpp:58
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


The related source loop is multi-versionned.

      6.1.6.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

37% of peak computational performance is used (12.00 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.6.1.1  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is fully vectorized, using full register length.


Details
All VPU instructions are used in vector version (process two or more data elements in vector registers).





      6.1.6.1.2  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 32 FMA (fused multiply-add) operations.




      6.1.6.1.3  -  Slow data structures access
  ---------------------------------------------------------------------------------------------------------

Detected data structures (typically arrays) that cannot be efficiently read/written

Details
 - Constant unknown stride: 2 occurrence(s)
 - Constant non-unit stride: 3 occurrence(s)
Non-unit stride (uncontiguous) accesses are not efficiently using data caches


Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.6.1.4  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 96 FP arithmetical operations:
 - 32: addition or subtraction (all inside FMA instructions)
 - 64: multiply (32 inside FMA instructions)
The binary loop does not load or store any data.







      6.1.7  -  Loop 2114 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Operators.hpp:369
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/index/IndexValue.hpp:109
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/TypedViewBase.hpp:216
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/Layout.hpp:187
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/Scattering.cpp:85-97
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


Warnings:
 - Non-innermost loop: analyzing only self part (ignoring child loops).
 - Ignoring paths for analysis
 - Too many paths. If you really need to analyze all of the 34 paths individually, rerun with max-paths=34
 - RecMII not computed since number of paths is unknown or > max_paths
 - Streams not analyzed since number of paths is unknown or > max_paths

Try to simplify control and/or increase the maximum number of paths per function/loop through the 'max-paths-nb' option.

This loop has 34 execution paths.

The presence of multiple execution paths is typically the main/first bottleneck.
Try to simplify control inside loop: ideally, try to remove all conditional expressions, for example by (if applicable):
 - hoisting them (moving them outside the loop)
 - turning them into conditional moves, MIN or MAX


Ex: if (x<0) x=0 => x = (x<0 ? 0 : x) (or MAX(0,x) after defining the corresponding macro)


      6.1.7.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

Warnings:
The number of fused uops of the instruction [HINT	#0] is unknown
0% of peak computational performance is used (0.00 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.7.1.1  -  Code clean check
  ---------------------------------------------------------------------------------------------------------

Detected a slowdown caused by scalar integer instructions (typically used for address computation).
By removing them, you can lower the cost of an iteration from 1.38 to 1.00 cycles (1.37x speedup).

Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.7.1.2  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is not vectorized.
2 data elements could be processed at once in vector registers.
By vectorizing your loop, you can lower the cost of an iteration from 1.38 to 0.69 cycles (2.00x speedup).

Details
All VPU instructions are used in scalar version (process only one data element in vector registers).
Since your execution units are vector units, only a vectorized loop can use their full power.


Workaround
 - Try another compiler or update/tune your current one
 - Remove inter-iterations dependences from your loop and make it unit-stride:
  * If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly:
C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)<<image_row_maj>>
  * If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA):
for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)




No data for this section



      6.1.7.1.3  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop does not contain any FP arithmetical operations.
The binary loop does not load or store any data.







      6.1.8  -  Loop 2353 from exec
  =========================================================================================================

The loop is defined in:
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/src/Kripke/Kernel/SweepSubdomain.cpp:88-106
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/util/TypedViewBase.hpp:211
 - /home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/build/Kripke/tpl/raja/include/RAJA/pattern/kernel/For.hpp:142


Warnings:
 - Non-innermost loop: analyzing only self part (ignoring child loops).
 - Ignoring paths for analysis
 - Too many paths. Rerun with max-paths=5
 - RecMII not computed since number of paths is unknown or > max_paths
 - Streams not analyzed since number of paths is unknown or > max_paths

Try to simplify control and/or increase the maximum number of paths per function/loop through the 'max-paths-nb' option.

This loop has 5 execution paths.

The presence of multiple execution paths is typically the main/first bottleneck.
Try to simplify control inside loop: ideally, try to remove all conditional expressions, for example by (if applicable):
 - hoisting them (moving them outside the loop)
 - turning them into conditional moves, MIN or MAX


Ex: if (x<0) x=0 => x = (x<0 ? 0 : x) (or MAX(0,x) after defining the corresponding macro)


      6.1.8.1  -  Path 1
  ---------------------------------------------------------------------------------------------------------

4% of peak computational performance is used (1.57 out of 32.00 FLOP per cycle (GFLOPS @ 1GHz))

      6.1.8.1.1  -  Code clean check
  ---------------------------------------------------------------------------------------------------------

Detected a slowdown caused by scalar integer instructions (typically used for address computation).
By removing them, you can lower the cost of an iteration from 27.97 to 12.00 cycles (2.33x speedup).

Workaround
 - Try to reorganize arrays of structures to structures of arrays
 - Consider to permute loops (see vectorization gain report)



      6.1.8.1.2  -  Vectorization
  ---------------------------------------------------------------------------------------------------------

Your loop is not vectorized.
2 data elements could be processed at once in vector registers.
By vectorizing your loop, you can lower the cost of an iteration from 27.97 to 13.99 cycles (2.00x speedup).

Details
All VPU instructions are used in scalar version (process only one data element in vector registers).
Since your execution units are vector units, only a vectorized loop can use their full power.


Workaround
 - Try another compiler or update/tune your current one
 - Remove inter-iterations dependences from your loop and make it unit-stride:
  * If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly:
C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)<<image_row_maj>>
  * If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA):
for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)





      6.1.8.1.3  -  Expensive FP math instructions/calls
  ---------------------------------------------------------------------------------------------------------

Detected performance impact from expensive FP math instructions/calls.
By removing/reexpressing them, you can lower the cost of an iteration from 27.97 to 12.00 cycles (2.33x speedup).


      6.1.8.1.4  -  FMA
  ---------------------------------------------------------------------------------------------------------

Detected 10 FMA (fused multiply-add) operations.
Presence of both ADD/SUB and MUL operations.

Workaround
Try to change order in which elements are evaluated (using parentheses) in arithmetic expressions containing both ADD/SUB and MUL operations to enable your compiler to generate FMA instructions wherever possible.
For instance a + b*c is a valid FMA (MUL then ADD).
However (a+b)* c cannot be translated into an FMA (ADD then MUL).




      6.1.8.1.5  -  Matching between your loop (in the source code) and the binary loop
  ---------------------------------------------------------------------------------------------------------

The binary loop is composed of 44 FP arithmetical operations:
 - 24: addition or subtraction (10 inside FMA instructions)
 - 12: multiply (10 inside FMA instructions)
 - 8: divide
The binary loop does not load or store any data.





[MAQAO] Info: STOP THE REPORT GENERATION
[MAQAO] Info: 
[MAQAO] Info: If your application produces files, they can be found in directory "/home/eoseret/qaas/qaas_runs/178-533-8580/intel/Kripke/run/oneview_runs/compilers/gcc_1/oneview_run_1785340487"
[MAQAO] Info: 
